If you are configuring an MP-202 device for Release 7.5, refer to Article #1151.

This guide explains the changes required to configure the AudioCodes MP-202 Telephone Adapter for fax machines.

The MP-202 adapter will be configured to communicate directly with your SIP Service Provider. The SIP Service Provider will need to provision an additional SIP trunk group for this purpose.

IMPORTANT:  AltiGen does not provide general configuration support for AudioCodes products. AltiGen only supports the MP-202 device as a fax adapter. A support agreement with AudioCodes is required. A dedicated public IP address for the device is required.

The instructions in this article based upon an AudioCodes MP-202 device with firmware version 2.6.4_build_9_1.